What is PS VR 2?
Sony’s PlayStation VR2 (PS VR2) virtual reality headset for the PlayStation 5 was unveiled on February 22, 2023. The headgear tracks motions with the aid of four cameras that are attached to it. The headset shadowing cameras are also used for controller tracking and a VHS feed for the “see-through view” point, which allows the stoner to see their surroundings without taking off the headset.
Do you need PS5 to use PS VR 2?
PS5 is required, but make sure it is supported properly. With room to spare, the PSVR 2’s tether can keep the headset attached in the recommended play area. However, if your PS5 is close to the edge of your play area, you run the risk of knocking over the press or becoming entangled in that excessive passion allowance while using VR. If your PS5 is farther from the edge of the play area, you run the risk of breaking your press, pulling the passion, or separating the headset. It looks good to set the PS5 horizontally on the floor before donning the headset. Be wary, though, as it cannot go forward. When used on an elevated face, it’s nice to place the PS5 horizontally on the floor before using the headset. But make sure it can’t go forward. if the console is set up on a raised platform, like an entertainment unit. The USB wire may simply be pulled in the worst-case scenario, rocking the harbour, though. When the PS5 is securely “anchored.
How to change the volume on PS VR2?
Yet, if you want to adjust the volume on your PlayStation VR2 headset, you must enter its software settings. As previously said, this requires that you interrupt your gaming session, but once you get used to it, it only takes a few seconds.
- Press the “Home” button on your PSVR Sense controller or your DualSense controller.
- Navigate to the “Sound” button in the display menu that shows at the bottom of your screen.
- Scroll down and press the “Volume” setting.
- Press the” X” button, likewise, move the volume slider left or right to adapt loudness as asked.
- Click the “Home” button to return back to your game.
Nevertheless, you will want to verify your audio affair device is set to PSVR 2, which you can adjust under the same menu with the volume controls if it doesn’t seem to be operating properly. Also keep in mind that if you’re using a headset with the PSVR 2, you’ll be able to adjust the volume right there if it has built-in controls, as the Pulse 3D does.
Keeping the VR headset clean
When cleaning the VR headset, it is important to open it and avoid using cleaning products that contain thinner, alcohol, or petrol. Wipes that are wet are also offensive. After each use, wipe the case down with a soft, dry cloth. For the lenses, use only dry, soft eyeglass cleaning cloths. Remove the black rubber light protection and wash it with water.
Pull on the frame carefully to remove the nuggets from their harbor. Let it dry completely before reinstalling the light guard. The headphones’ ear pads are also removable and washable with water. Vacuum it precisely with a handheld vacuum cleaner if dust has gathered in the vents.
